HoopMaster Mighty Hoop 8” x 13” Magnetic Embroidery Frame

The Mighty Hoop 8” x 13” magnetic frame is an excellent choice for large embroidery designs. Ideal for the fronts and backs of hoodies, sweatshirts, jacket backs, large bags, towels, and blankets, it provides strong holding power with minimal fabric distortion. This frame streamlines the hooping process and reduces operator fatigue, making it a valuable tool for efficient embroidery production.

Specification

• Internal Frame Area: 8" x 13" / 203mm x 330mm
• Max. Embroidery Area: 7.12" x 12.12" / 181mm x 308mm

We recommend leaving a minimum of 11mm at each side of the frame (internal frame area) to allow space for the needle and presser foot.

Key Features

• Ideal for Large Designs: Suitable for embroidery on the fronts and backs of hoodies, sweatshirts, jacket backs, large bags, towels, and blankets.
• Strong Magnetic Grip: Firmly holds materials in place, even those that are thick or slippery, without the need for tightening.
• Minimises Hoop Marks: Magnetic pressure is evenly distributed, reducing the risk of hoop burns and fabric creasing.
• Improved Hooping Efficiency: Simplifies alignment and speeds up the hooping process, especially when used with the HoopMaster fixture system.

Compatibility

• ✅ Compatible with most industrial & commercial embroidery machines, including Brother PR Series & ZSK Sprint & Racer models. Check our compatibility guide for more information on other machine brands.
• ✅ Fits Brother PR series machines, including PR680W and PR1060W models.

⚠️ Important Notices

For Brother PR Series Users:

This is the largest Mighty Hoop frame that will physically fit the Brother PR Series. However, due to the machine’s maximum embroidery areas:

• 6-needle models are limited to a maximum sewing area of 7.25” x 11.5” (184mm x 292mm)
• 10-needle models are limited to 7.25” x 11.75” (184mm x 298mm)

The full internal width of this frame (330mm) cannot be fully utilised, but the frame will still fit on the machine.

We strongly recommend using this frame in conjunction with the Brother Wide Table or Brother Tubular Frame Support, to support the additional weight and reduce strain on the machine.

Additionally, this frame does not automatically communicate its size to Brother PR machines, so you must always perform a trace before beginning embroidery to ensure the needle and presser foot do not contact the frame. Machine damage caused by improper setup is not covered under warranty.

For ZSK Machines:

• When using this frame on a ZSK SPRINT 6 or SPRINT CLASSIC model, the Extended Tubular System Holder may be required. Please check which Tubular System Holder you have on your machine, as new models now come with the extended version as standard. For more information, please get in touch with our support team.

• This frame is only compatible with ZSK SPRINT Single-head and ZSK Multi-head RACER W and WL series multi-head machines (495mm head distance).
• Not compatible with ZSK Multi-Head RACER S or SL series, which have a smaller 400mm head distance.

For Other Machine Brands:

If you are using an embroidery machine brand other than Brother PR or ZSK, please consult your supplier to confirm compatibility before purchase. Frame fitment and usability can vary across models and brands.

Magnet Safety Warning

This frame uses very strong magnets. If you have a medical implant or any device sensitive to magnetic fields (e.g. pacemakers), please consult your physician before using this product.
By purchasing, you acknowledge that you have read and understood the magnet warnings provided on our website.

As a leading UK supplier of Mighty Hoop and HoopMaster systems, Stocks Sewing Machines Ltd is here to help ensure compatibility and provide expert support for setup and usage. Please contact us for technical advice or fitting guidance.